Trusted spray foam roofing & insulation services for Slaton, TX property owners. Licensed, insured, and backed by manufacturer warranties.
From SPF roof installation to attic insulation, Lapolla Industries covers every spray foam need in Slaton.
Attic insulation with spray foam delivers the highest R-value per inch and eliminates the air infiltration that accounts for up to 40 percent of your home energy waste. Our crews install cleanly and efficiently — in and out in one day.
Pre-purchase, post-storm, or routine maintenance — our inspection reports give you the data you need to make informed decisions about your roof. Infrared moisture scans reveal trapped water invisible from the surface.
Precision leak detection and permanent repair for active roof leaks. We use infrared moisture scanning and visual inspection to trace the leak to its source, then apply a lasting fix — not a band-aid — so it never comes back.
Elastomeric coatings for standing seam, corrugated, and R-panel metal roofs. We seal rust spots, failing fasteners, open seams, and ridge caps — stopping leaks and adding reflective energy savings in a single application.
Professional flat roof repair for all membrane types — TPO, EPDM, modified bitumen, built-up, and PVC. We find the actual source of the leak using infrared scanning and fix it permanently, not with another temporary patch.
Expert repair for existing SPF roofs including blistering, coating deterioration, punctures, and storm damage. We restore your foam roof to like-new condition with matching materials and factory-specified application techniques.
Roof restoration saves 50 to 70 percent compared to full replacement while delivering equivalent performance. Our SPF and coating systems seal every seam, add insulation value, and provide a reflective finish that cuts cooling costs.
Silicone coatings provide the longest service life of any roof coating product. Our crews apply them over metal, TPO, EPDM, built-up, and spray foam surfaces — sealing the entire roof in a seamless, reflective, waterproof membrane.
Ponding water, chronic leaks, and moisture infiltration destroy roofs and building interiors. Our waterproofing systems use closed-cell spray foam and silicone coatings to create an impermeable barrier that handles standing water indefinitely.
Commercial roofs deteriorate from the surface down. If your structure and deck are sound, restoration with spray foam and silicone coating is the economically superior choice. We handle buildings from 5,000 to 500,000 square feet.
Emergency storm damage response with tarping, property protection, detailed damage documentation for insurance, and complete roof restoration to pre-storm condition. We work directly with insurance adjusters.
New spray polyurethane foam roof installation that creates a seamless, self-adhering membrane with the highest R-value per inch of any roofing system. Energy-efficient, leak-proof, and engineered to last 30 to 50 years with periodic recoating.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
Full roof replacement with spray polyurethane foam delivers superior insulation, waterproofing, and wind uplift resistance compared to conventional membrane systems. We strip the old roof, inspect the deck, and install a new SPF system built for decades.
Transform your crawl space from a moisture liability into a conditioned, energy-efficient part of your building envelope. Spray foam eliminates condensation, prevents mold conditions, and dramatically improves floor comfort above.
Even in a community the size of Slaton, TX, commercial buildings, warehouses, and agricultural structures need the same high-performance roofing and insulation as facilities in major metros. Lapolla Industries provides spray foam solutions engineered for Texas conditions — from metal building insulation to flat roof waterproofing — at a price point that makes sense for Slaton businesses.
Our Slaton crews specialize in spray foam applications that conventional roofers simply cannot do: re-sloping flat roofs to eliminate ponding, insulating metal buildings from the inside out, and restoring aging commercial roofs without the cost and disruption of a full tear-off. If your Slaton building has a roof problem, we have a spray foam solution.
Quality, integrity, and results — the Lapolla Industries difference for Slaton property owners.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Storms do not wait and neither do we. Our emergency crews are on call around the clock to tarp, secure, and protect your property when you need it most.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
Answers to the most frequently asked spray foam questions from Slaton property owners.
Spray foam insulation costs in Slaton typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Slaton homeowners see a full return on investment through energy savings within 3 to 5 years.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Slaton we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
A properly installed SPF roof in Slaton can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
Yes. Every Slaton crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.
In most cases, yes. One of the biggest advantages of SPF roofing is that it can be applied directly over existing roof membranes — TPO, EPDM, built-up, and even metal — without a costly tear-off. Our Slaton crews evaluate the existing substrate to ensure it is structurally sound before application.
Most residential attic insulation projects in Slaton are completed in a single day. Our crews prep the space, apply the spray foam to the desired thickness, and clean up within 6 to 8 hours. The foam cures within minutes, and you can feel the difference in your home comfort levels the same day.
Honest feedback from property owners who trusted Lapolla Industries with their spray foam projects.
"Lapolla Industries coated our standing seam metal roof with a reflective system that stopped the leaks at the panel overlaps. The building stays significantly cooler in summer and the coating has held up perfectly through two winters."
"We needed our concrete roof deck waterproofed before installing new equipment on it. The crew applied a monolithic membrane that handles foot traffic and ponding water. Two years in and zero issues. Money well spent."
"Hail tore up the coating on our foam roof and we had exposed foam everywhere. They responded the next day, documented everything for insurance, and had the entire roof recoated within a week. Fast, professional, and insurance handled smoothly."
Lapolla Industries proudly serves property owners in these cities near Slaton.